Samsung Thin Client Hookup

From Longview ISD Technology Wiki

Revision as of 17:03, 9 January 2013 by Pwilliams (Talk | contribs)
Jump to: navigation, search


Cable Connections

  • Remove the key at the base of the thin client. (May not have one.)
  • Raise the monitor.
  • Rotate the monitor sideways for ease of access to the connections.
  • Plug in the network cable, mouse & keyboard – in a straight line as pictured.

Cable Connections

  • Plug the power cable snuggly into this hole. Located on the bottom of the monitor.
  • The toggle switch should be in the ON position (as shown).
  • Rotate the monitor back to the correct position, making sure the power plug is not pulled out.

Power Plug


  • Speaker Bar – Is attached either on top of the monitor or is placed under the monitor.
  • Speaker wires - Plug them into the side of the monitor.
    • Green audio plug into green hole
    • Black USB plug into one of the USB ports located close to the green audio plug.

Speaker Connection


An extra USB plug is available on the side of the monitor where the speakers plug in. It can be used for a flashdrive.

Remember: Remove the flashdrive before you Log Off or Shut Down the computer.


You may attach a headset to a thin client computer. (if desired & available)

  • Unplug the green audio plug from the side of the monitor.
  • Plug the headset connection into the green audio hole. The headset must have a small mini-plug connector.
Personal tools